|
|
|
|
MINISONIC 600 and MINISONIC 2000 are accurate and economical instruments for the flow or volume measurements of liquids in full pipes.
These ultrasonic instruments resolve in that way most of industrial needs.
In standard they offer :
 |
a display of the flowrate and volume, of the direction and flow speed
|
| |
one 4-20 mA output, 2 relays, 1 serial link, 1 software for PC
Better performance and greater intelligence thanks to a new board (CE) and to more resources such as : |
| |
new measurement technology 'ESC' (or Echo Shape control)
|
| |
measurement resolution <0.1 ns
|
| |
higher amplification gain range and noise rejection
|
| |
ergonomic keypad and menu calibration, backlighted display
|
| |
Possible to set a second 4-20 mA output
|
MINISONIC are available in dual chord and dual pipe versions more information.
More information
|
|
|
|
|
|
|
|
|
| all pipe diameter types : 8mm up to 3300mm (MINISONIC 600 up to 600 mm and beyond for MINISONIC 2000)
| |
| most of liquids whether they are conductors or not, including ultrapure liquids
| |
| every flowrate of clear water, drinking water, waste water
| |
| every flowrate of oil products, chemicals (measurement without contact)
| |
| flowrate of foodstuffs
|
|
|
|
|
Download the specification sheet in PDF :
Contact us
|
|
Suitable for non-conductor and ultrapure liquids
|
|
|
|
| they accept external probes ( without any contact with the liquid) : easy installation on a pipe in place without boring through or break in the process
| |
| they accept intrusive probes : the installation can be realised under pressure without the need of the pipe emptying
| |
| Practical accuracy with common liquids (water, …) :
- DN <= 100 mm : +/- 2 % if v > 0,3 m/s
else +/- 5 mm/s
- DN > 100 mm : +/- 1 % if v > 0,3 m/s
else +/- 2 mm/s
| |
| cost independant of the diameter
| |
| No pressure drop
| |
| No moving parts
| |
| No servicing (no recalibration)
| |
| Bidirectional measurements
| |
| Fast response time
|
The MINISONIC permits the measurements of low flowrates (a few l/h) with specific spools for axial speeds.
|
|
|
|
MINISONIC RANGE
|
